UT-5040G Outdoor Digital Wireless Bridge Transmitter

UT-5040G Outdoor Digital Wireless Bridge Transmitter

 

Because of its high bandwidth and high stability, the product can work flexibly with battery, solar energy, wind energy and other power supply modes in the absence of market electricity in the field. Because of these characteristics of the equipment, the product is widely used in construction site monitoring, forest fire prevention monitoring, tourist attractions monitoring, oil field mine monitoring, highway monitoring, campus monitoring and other environments.

 

Please send us email for more details,we will recommend you suitable resolution.

 

 

 

Features

 

Product overview

 

UT-5040G high-power outdoor wireless bridge is suitable for wireless network connection service in harsh field environment. It provides high-bandwidth network connection for deployed enterprises and industrial users and transmission requirements of multimedia IP data. It is not only suitable for network transmission but also suitable for large-scale IP monitoring. SF5040G high-power outdoor wireless bridging equipment can use the built-in 18dBi gain antenna to connect two long-distance nodes effectively. The transmission distance can reach 5-8km and the transmission bandwidth can reach 60-90Mbps, which can provide wireless transmission quality no less than that of wired network.

 

UT-5040G high-power outdoor wireless bridging equipment supports AP mode, WDS mode, ClientBridge + Repeater AP mode. The cooperation between different modes can achieve different effects. It can do point-to-point transmission and point-to-multipoint transmission. In WDS mode, one pair of 8 links (filling in 8 different MAC addresses) can be realized. In AP mode, 32 clients can be supported theoretically. The device supports the Chinese-English interface, which is easy to operate, eliminates the tedious operation mode, makes debugging faster and more convenient, is conducive to rapid deployment, and is very suitable for engineers and technicians to quickly start. The power supply adopts the design of wide voltage input of DC12-24V, and the actual power consumption of the equipment is less than 5W. In the absence of market electricity in the field, it can work flexibly with battery, solar energy, wind energy and other power supply modes.

Function Feature:

1, It supports 802.11an mode with transmission rate of 2TX (300Mbps) / 2RX (300Mbps)

 

2, Supporting up to 29dBm wireless output power

 

3, Support wide voltage input, voltage input range DC12 ~ 24V

 

4, Supporting load current protection mechanism, built-in 4kV ESD (Electro Static Discharge) load and discharge lightning protection design, for the use of household indoor or special balcony eaves in frequent lightning areas, as long as the grounding wire is well connected, instantaneous lightning damage can be prevented.

 

5, Support 8 groups of Multiple-BSSID functions and IAPP wireless network roaming function

 

6, It supports wireless IGMP v1/v2/v3 function and can transmit instant video and audio packets on the transmission line.

 

7, Support WDS (Wireless Distribution Service) can support 8 groups of bridging functions, while supporting multiple Tag VLANs.

 

8, Intelligent wireless distance parameters are automatically set. After input distance, the system can automatically fine-tune the optimal corresponding advanced parameters to achieve the optimal wireless transmission rate effect of relative distance.

 

9, Supports the bandwidth management and flow control of QoS WMM (Quality Service), and supports the multicast and priority functions of the IEEE 802.1p QoS standard. For multimedia applications, data priority can be set according to the IP DSCP (DiffServ Code Point) field.

 

10, Support the IEEE802.1d Spanning Tree extension tree function of wired and wireless interface. When multiple WDS wireless connections are used to connect wired lines at the same time to achieve mutual support between wired and wireless networks, effectively prevent the problem of Loop infinite loop abnormality in network.

 

11,  Support SNMP v2c, SNMP v3, SNMP Trap

 

Technical parameters
Network standard IEEE 802.11a/n;IEEE802.3; IEEE802.3u
Chipset Atheros AR7240+ AR9280
SDRAM 32 M Byte
Flash 8 M Byte
Ethernet interface 2x 10/100 basic-TRJ45 Connector
Radio frequency OFDM
Data transmission rate 802.11a:54, 48, 36, 24, 18, 12, 9, 6Mbps
802.11n:20-MHz Bandwidth: Data Rate Supported by MCS 0-15 for
40-MHz Bandwidth: Data Rate Supported by MCS 0-15 for
Working frequency 5.15~5.35 GHz
5.47~5.7 GHz
5.745~5.825 GHz
Transmit power Up to 29 ± 2 dBm
Sensitivity  -92dBm@ 11Mbps, -73dBm @ 54Mbps, -73/-69dBm @ HT20/HT40 MCS15
Safety 64-bit/128-bit/152-bitWEP encryption
WPA/ WPA2(-PSK using TKIP or AES) WPA/ WPA2 (-EAP using TKIP)
802.1x authentication; hidden SSID
Antenna port 2x MCX connector
Antenna gain Built-in 18dBi dual-polarized planar antenna
Operation mode Working mode – AP / Client Bridge / WDS Bridge PtP and PtMP (up to 8 links)
Channel selection (Setting varies by Country)
Step power 1dBm step
Work environment Working temperature – 45 ~ + 70 C, working humidity 10 ~90%
Size 270mm*270mm*80mm
Weight 2.2Kg (without packaging); 3Kg (with packaging)
Power supply mode POE power supply: 12~24V +5%

 

 

Application area

 

Because of its high bandwidth and high stability, the product can work flexibly with battery, solar energy, wind energy and other power supply modes in the absence of market electricity in the field. Because of these characteristics of the equipment, the product is widely used in construction site monitoring, forest fire prevention monitoring, tourist attractions monitoring, oil field mine monitoring, highway monitoring, campus monitoring and other environments.

 

 

 

 

Parameter

Solution

Video

Message

Reviews

There are no reviews yet.

Be the first to review “UT-5040G Outdoor Digital Wireless Bridge Transmitter”

Your email address will not be published. Required fields are marked *

1 × 3 =